About friendpastor1

Description

"The Window Repairs Awards: The Best, Worst And Most Bizarre Things We've Seen
Window Repairs Can Save Homeowners Time and Money

Window repairs can cut down on time and cost for homeowners. However, there are times when replacing windows that are old is more economical.

Cracks or holes in the glass of windows are usually caused by stray baseballs or projectiles. With the appropriate tools, these are simple fixes.

However, if the frame of the window is rotting, it's best to replace the entire window.

Broken or cracked glass

A bad storm or a stray piece of debris from the lawnmowers, or your favorite vase set down too hard could crack the glass in your windows. Fortunately, a little time and effort can keep these cracks from becoming worse and save you the cost of replacement glass.

First, you must remove the broken glass. Wearing gloves, carefully remove any trim, molding or glazing putty that holds the glass in the frame. You may have to use an utility knife to get rid of any glass pieces that are stuck to the frame.

After removing the window, clean the area around it and the surface thoroughly. This will prevent the adhesive used to hold the new glass from leaking out and causing more damage. Make sure the new glass fits well. If the new glass is larger than the previous one, you'll need to reduce it using circular saw or miter saw.

After your surface has been cleaned, you can apply a glass glue designed specifically for window glass. Place the glass back into the window sash. Be careful not to bend the glass or moving it during this step. This could cause cracks to grow deeper.

You can also apply products such as Loctite Super Glue Glass, which will fill in the crack and seal it. It's designed to work with all types of glass including tinted windows. This kind of fix will not completely hide the crack. It's not suitable for windows that are visible from the outside.

Another option is epoxy, which is a little more time-consuming to apply but provides the most significant seal and can make your window glass that has been damaged almost invisible. It is important to thoroughly clean the glass and the surrounding area before applying epoxy. It is also important be prepared for any sudden weather changes that might cause the crack to expand again. If you are not confident with these DIY techniques or if the cracked glass is very large or two-paned, it's recommended to contact a professional.

Sashes that won't open

A window that will not remain up is more than a nuisance and could be dangerous. Double-hung and single-hung windows are equipped with balancing mechanisms that keep the sash from sliding. However, one or more of these mechanisms could become disconnected or damaged. Inspect the balance bar and pivot shoe to determine if one or both have been dislodged. If they have, you'll need to replace them in order for the sash to remain stable.

The moisture in sash window frames can cause cycles of contraction or expansion. This could cause the frame joints to become loose over time and stick. It is possible to repair this issue without removing the window if you use a utility knife to cut the frame joints apart. If your wood appears to be swollen, it's usually due to a lack of flashing on the exterior of your home which allows water to enter the frame.

A sash cable that has snapped is another reason that can cause windows that aren't opening. It is possible to reconnect the cord with pliers and by slipping the sash back into its normal position. If the cord is completely damaged, you'll have to replace it.

Paint can also cause windows to become bounded and become difficult to move. If you find that the sash channel of double-hung windows is sealed with paint it is possible to break the bond by scoring the paint with an utility knife and attempting to move it. If this doesn't work, you will need to take off the sash and then cut the line between the sash stop, strip that separates or jamb on both sides of the window (Photo 1).

The sash shoes used in single-hung windows are typically made from plastic or metal. These shoes have a U shaped slot that locks when the shoe is in its normal position inside the sash. To unlock the shoe, you need a screwdriver to rotate the slot so that it faces the other way (Photo 2). Then, move the sash up and down, and then check if the window works normally.

Rotting Wood

Wood rot isn't only unsightly, it poses a real threat to the structural integrity of the area of the home it's infiltrating. The fungus responsible for it to thrive on moisture, turning wooden beams, joists and walls into a soggy mush. To prevent rot, you should ensure that your home is properly maintained and the areas that are exposed to the elements are secured. However, even the best of intentions, it only takes one missed painting session or clogged gutter, or a minor leak in the roof to expose windows or porch columns, as well as other areas of your home to a variety of decay-related organisms that could quickly destroy the structure and compromise its structural integrity.


Most wood decay is caused by excessive moisture content, which can be caused by rainwater seepage, condensation or rising dampness. The latter can occur when damp-proofing course is not installed or is damaged or when internal materials like plaster and drywall become affected by leaky pipes, appliances and fixtures.

The first step to repair the rot is to take off the old material. It is usually easy to do this using a pry-bar but a combination hammer and chisel may be needed for the most difficult areas. After the decayed wood has been removed, the gap needs to be filled and sealed. There are many types of wood fillers. The best one will depend on the amount of work you're willing to put into it and how deep the hole.

If the rot has gotten too far for a filler work, you'll have to replace the damaged part. You can engage an expert to do this or do it yourself. This is a more involved project, however, and requires a good carpentry skills to get the job done right. If you're unsure of your skills at DIY you should contact an expert.

Repairing rotting wood is possible however it is simpler (and cheaper) to avoid the issue at the beginning. Prevention measures include sealing cracks around windows, scraping and repainting caulk as well as installing a drip edge on the roof to stop water from splashing onto the trim on the exterior. Also, you should look for signs of excessive humidity around your window and consider using a dehumidifier in order to keep the humidity levels under control.

Dirty Seals

Water dripping from or around windows is the most obvious indicator that seals on windows are shrinking. Sometimes, this is easy to spot but most of the time it's hidden within a wall and is harder to locate. This can cause soft wood, mould, or even structural damages in your RV. Regular inspections and cleaning are the best method to safeguard windows. By gently pressing against the seal trim and visually examining it can help you identify soft spots before they cause water damage.

Fogged windows are another common indication of a leaky seal. upvc window repair near me might not be structurally damaging or cause your electric bills to rise, but they affect the appearance of your RV.

The weather is a major factor in the failure of window seals. In hot temperatures, seals expand while in colder temperatures, they shrink. This can be mitigated by storing your camper in a cover and keeping it away from direct sunlight. A simple car wash can help prevent the salt from damaging the rubber seals on your windows.

Other factors that can cause window seal failure are scratching the seals with brushes and washrags that contain cleaning agents that degrade the rubber. This can make the seals fragile and susceptible to cracking. The best way to avoid this is to avoid using harsh cleaners on your windows and to keep the windows' seals and sash tracks clean using a dry brush.

This is the simplest and most affordable method to safeguard the windows of your RV. This also gives you the chance to inspect the seals on your windows and make any necessary repairs.

It's more expensive to have your window seals lubricated or replaced using 303 Protectant spray, but it's less expensive than repairing water damage that is caused by faulty sealing. If you're willing to commit a few hours of work it is a simple DIY project that can prolong the life of your RV's windows, and save you money in the long term.