About kickmeat5

Description

11 Ways To Completely Redesign Your Timber Sash Windows Cambridge
Door Hinge Repair Cambridge

Door hinges are a minor aspect that can make a big impact on the functionality and appearance of your doors. Replacing the hinges that sound squeaky is a quick and inexpensive upgrade that can improve your home's curb appeal.

Petroleum jelly or bar soap is a common method to fix squeaky hinges. Rub the item onto the hinges until it's coated.

Replacement Hinges

Hinges are a small component that can cause a significant amount of damage when they become worn or broken. The good news is that hinges can be repaired without the need for special tools. It's crucial to choose the correct hinge for your home. This will ensure that your door shuts and opens with ease. If your door hinges do not work properly get in touch with an expert immediately to fix them.

A defective hinge for a door could result in the door becoming bent or pulled away from the frame's base. This is typically caused by improper use or weight too much. Lubricating your hinges is essential to prevent this. This will stop the hinge from rusting or squeaking and will extend the life of your doors.

There are several different types of hinges. Each type has its own advantages and drawbacks. The butt joint is the simplest hinge. It connects a door to both sides using a pin. aluminium casement windows cambridge of hinge is ideal for use on doors with light frames, as it doesn't require much strength to open and close. The butt joint is more susceptible to damage than other hinge.

For doors that weigh a lot it is recommended to choose a continuous piano hinge. This type of hinge is mounted on the door and runs the full length of the door, allowing it to close and open easily. The benefit of this style is that it doesn't need a center support and is more stable than other hinges.

Another hinge type that is commonly used is the storefront pivot hinge, which permits doors to pivot from one place at the top and the bottom of the door. These hinges are typically found in commercial buildings and are difficult to fix if damaged. A professional can help with this issue by mounting an entirely new pivot hinge or replacing the existing one. Depending on the type of hinge used, the price will differ.

Loose Hinges

When hinges aren't tightened the door will hang unevenly and can even begin to scrape the floor. This can be very irritating. With a few tools, any homeowner can fix hinges that are loose. Most of the time, simply tightening hinge screws can fix the issue however, in some cases the holes in the screws could have been stripped and will not remain tight. If the screw holes are damaged, you'll have to drill them out and then plug them with wooden dowels or glue-coated wooden matches.

It is essential to lubricate and tighten your door hinges regularly to avoid them becoming loose. It is also crucial to look for any signs of damage to the hinges. If you spot cracks or chips in the metal, this can be an indication that it's time to replace the hinge. You should also replace hinges if they begin to become stuck or bind when you shut and open the door.

The most frequent cause of hinges breaking is wear and tear from frequent use, and not having proper oiling or tightening. This is particularly relevant for doors that are used frequently by children, because they can hang from the door handles or even hang the door on hinges. This could cause the hinges to loosen and may even fall off.

If the hinges are loose for a short period of time, you can just tighten them using the help of a screwdriver. However, when they're loose for a longer time the constant movement of the hinge plate and the screws will start to expand the holes that screws enter. This will eventually make it impossible for the screws to remain in place and they will end up stripped, making them useless. To fix this, simply dip the bare end of a wooden match into regular carpenter's adhesive and then tap it with a hammer, working the glue into the hole as much as possible. It's likely that you'll have to insert several of these coated matches to fill the hole.

Rusty Hinges

Rust is a common problem for hinges used on doors, especially on doors that are older. It can make them appear bad, but more importantly it can cause the hinge to fail and break which could pose a danger to those who use the door. It's possible to save an old hinge by performing some work. The first step is to remove the hinges from the door, and then clean them to get rid of any gunk. Once the hinges have been cleaned and oiled, they are ready to use them again.

Modern doors are made of brass or alloys of metal, which don't rust easily. Despite this, some people still use old-fashioned iron hinges for their aesthetics and durability even though they are more susceptible to rust than modern ones. The best way to avoid this is to stop the hinge from becoming rusty.

It is easiest to clean the hinges on a regular basis using steel wool and water, particularly when they are damp. If you do this frequently the rust will not be as big of a problem for the hinges on your door.

If you're looking to go further, you can use stainless steel for your hinges. Unlike iron, stainless steel will not be rusty and will provide your home with modern look. If you aren't able to replace your hinges the best thing to do is periodically scrub them, and then apply lubrication.


When you are removing hinges, make sure to do so fully so that you can reach all the tiny crevices and corners to scrub off any corrosion. Once the hinges are clean and dry, you can apply a mixture of oil and vinegar to further lubricate them and help to protect them from corrosion. This is an inexpensive and simple solution that can find in most homes. It's worth trying before replacing your hinges.

Doors that won't close

Sometimes doors can become misaligned over time because of the normal expansion and contraction of wood. When this occurs, the door might get caught on the corners of the frame or catch on the latch when trying to close it. A little effort can often fix these issues. If you can tighten the hinges and correct the alignment issue the door will shut properly once more.

Begin by inspecting the hinges for loose screws. The loose screws can cause the hinge to sag and create an opening between the leaf of the hinge and the jamb. This could cause the latch to not reach the strike plate's hole and result in a stuck-up door.

To fix this, take off one of the hinge screws and slide a piece of cardboard (we prefer using the backs of old legal pads) between the hinge and the door jamb. Then, screw the hinge back in place. This will increase the gap on the side of the latch and decrease it along the hinge side. The latch can now clear the strike plate. Repeat the procedure if the issue is solved.

If you are still having issues you can hammer or shim the strike plate in order to align it with the hole for the latch. If this is the case, a small amount of wood filler or paint is usually enough to cover the changes.

Damage to the physical structure or prolonged use can also cause the strikeplate to become bent or warped, which can cause it to touch the edge but not extend enough to secure the door. To test for this apply lipstick to the latch and place a strip of masking tape to the strike plate. Close the door and open it. The lipstick will leave a trace on the tape where the latch contacts the strike plate hole. If the mark is located below the hole then your latch needs to be moved upward.